|
Author
|
Topic: editor installation?
|
tonyward
Junior Member Posts: 7
From:uk
Registered: Nov 2000
|
posted 11-28-2000 03:13 PM
   
hope someone can help me....
try to run the installed editor & get this:
WINROOMEDIT caused an invalid page fault in
module WINROOMEDIT.EXE at 0137:00445573.
Registers:
EAX=00000000 CS=0137 EIP=00445573 EFLGS=00010286
EBX=00000000 SS=013f ESP=0082fd70 EBP=00400000
ECX=ffffffff DS=013f ESI=00000006 FS=1287
EDX=00000000 ES=013f EDI=00844240 GS=0000
Bytes at CS:EIP:
8b 10 8d 4c 24 0c 6a 01 51 6a 01 50 ff 52 50 50
Stack dump:
ffffffff 3f800000 00000000 00000000 00000000 00000000 00000000 00444458 00000000 8159bd70 0082fe38 00720000 fffffffc ffffffe9 00000404 00000304 I'm at minimum spec (well a 233 anyway) win 95, default locations for install......
anyone help me? IP: Logged |
JohnCroft
Member Posts: 251
From:Germany
Registered: Nov 2000
|
posted 11-28-2000 10:04 PM
Hi!Make sure you use a 16bit resolution on your desktop, neither 8bit, nor 24 or 32bit is accepted and will definetly crash the program (thanks a lot CORE, a simple check would prevent this). Also be sure to install in the default location!
Works fine on my 1600x1200 w/ 16bit! Greetinx
John Croft [This message has been edited by JohnCroft (edited 11-28-2000).] IP: Logged |
tonyward
Junior Member Posts: 7
From:uk
Registered: Nov 2000
|
posted 11-29-2000 12:01 PM
screen is at 1024*768 (16 bit colour), all files loaded to default locations (did'nt I say that in the original post?) but still get the same message!IP: Logged |
JohnCroft
Member Posts: 251
From:Germany
Registered: Nov 2000
|
posted 11-29-2000 01:08 PM
Hi!Sorry, didnīt read the other posting before, because you double-posted your problem! Regards,
JohnCroft (Laraīs lost brother ;-)
IP: Logged |
tonyward
Junior Member Posts: 7
From:uk
Registered: Nov 2000
|
posted 11-29-2000 01:38 PM
sorry, I did'nt realise double posting was not allowed.
I posted to the two forums so that I could reach as many people as I could!IP: Logged |
mrobinson999
Junior Member Posts: 15
From:lincoln
Registered: Dec 2000
|
posted 12-01-2000 05:52 AM
hi,i too am having the level editor crash problem. i have norton crashguard enabled and when the editor starts, it says that an access violation has occured and has the same hex-code numbers and invalid page fault codes like the top entry by johnward. screen resolution is fine, 16bit is set, processor is way above the minimum, having got a clue what to do next, have emailed eidos UK and now waiting for a reply, knowing eidos this will come when tomb raider 456 is released! mattsatty IP: Logged |
Reb@Eidos
unregistered
|
posted 12-01-2000 11:24 AM
Have you updated your video card driver lately?IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
