Posts: 14
From:england
Registered: Dec 2000

posted 12-10-2000 07:00 AM               

---

why when placing objects is it so difficult to position them in the correct place e.g the flame emmitter and the swinging rope.

IP: Logged

Posts: 152
From:Greece
Registered: Dec 2000

posted 12-10-2000 12:52 PM               

---

Place your object near the point where you
want it to appear.Press and hold left Ctrl
and use the arrow keys to move the object
one square at a time.Use Q/A or W/S to move
up or down.Right click to rotate

------------------

~{^I*X^}~

IP: Logged

Posts: 251
From:Germany
Registered: Nov 2000

posted 12-10-2000 09:19 PM               

---

The biggest problem is the rotation!
The bigger side of fire_emitter2 has to point to the wall, then it works fine!

IP: Logged

posted 12-13-2000 12:42 PM              

---

Placing objects can be frustrating. In sticky situations such as the torches near the platform in the Stack rooms, try placing them on the floor square of the platform, then use the control and arrow keys to position them on the wall. Use the Room + and - keys to raise and lower, and of course, right click to rotate.

[This message has been edited by Reb@Eidos (edited 12-13-2000).]

IP: Logged