|
Author
|
Topic: TR2WAD 1.2, WADMerger 1.6 & sources!
|
Michiel
Member Posts: 216
From:14th floor
Registered: Jan 2001
|
posted 03-18-2001 12:40 PM
   
I'm uploading TR2WAD 1.2, WADMerger 1.6 and the source codes (including the beginning of TR2PRJ) to http://trwad.8m.com right now. TR2WAD has now support for TR5 levels.
TR2PRJ is only avaible as source code and isn't finished, it only reads a part of the first room in a PRJ files and dumps some infoMichiel IP: Logged |
psiko
Member Posts: 454
From:Rome
Registered: Mar 2001
|
posted 03-18-2001 04:28 PM
I went to your page and I did not found the new version of your programs!Ok, I read that it will be supported in a week the importing of 3ds and dxf files in a wad! I can't believe that what I asked will be all ready in a week! I can't waittttttttttttt  )))))) ------------------
| |--->> psiko <<---| | IP: Logged |
psiko
Member Posts: 454
From:Rome
Registered: Mar 2001
|
posted 03-18-2001 04:32 PM
Oh! BTW! there's a problem! will lara cross trough the objects we create with CAD? better if she can't, like a normal object!IP: Logged |
torrok
Member Posts: 114
From:Roebling, NJ, USA
Registered: Jan 2001
|
posted 03-18-2001 06:24 PM
Hey Mike
where are the new downloadsIP: Logged |
tomoko
Member Posts: 84
From:Austria
Registered: Jan 2001
|
posted 03-19-2001 01:12 AM
Why does The TR2WAD1.2 Pprogram always say: runtimeerror '48'
data not found:zlib when I want to open a trc file? pleas help me
Tomoko [This message has been edited by tomoko (edited 03-19-2001).] IP: Logged |
tomoko
Member Posts: 84
From:Austria
Registered: Jan 2001
|
posted 03-19-2001 03:43 AM
Now it works!!
but now I've another problem!
when I import the irland horizon in Wad Merger, the program says:
"Unknown version, please update Wadmerger!"Tomo
IP: Logged |
Jan
Member Posts: 89
From:Osthofen
Registered: Dec 2000
|
posted 03-19-2001 06:13 AM
So, where are those downloads?? Canīt find them !!!Bye Jan IP: Logged |
tomoko
Member Posts: 84
From:Austria
Registered: Jan 2001
|
posted 03-19-2001 09:07 AM
http://trwad.8m.com
search for download- Source.zipTomoko IP: Logged |
Jantje
Member Posts: 93
From:The Netherlands
Registered: May 99
|
posted 03-19-2001 10:19 AM
I took a guess that the download url probably would be: http://trwad.8m.com/Download/Source.zip But then I get an error from stupid Freeservers >  ------------------
"Ahahahaha, right, in your next life!" Sophia Leigh (or is it Lee?)
IP: Logged |
Jan
Member Posts: 89
From:Osthofen
Registered: Dec 2000
|
posted 03-20-2001 06:05 AM
Now I got it !!! Thanks!!!IP: Logged |
Jan
Member Posts: 89
From:Osthofen
Registered: Dec 2000
|
posted 03-20-2001 06:13 AM
But now there is an error:
Runtimeerror 53
File not found
Thats it! What do I have to do??? Bye Jan IP: Logged |
Cjmovie
Member Posts: 51
From:Orangeburg, SC US
Registered: Dec 2000
|
posted 03-22-2001 11:58 AM
Where are the downloads?I can't find them on the downloads page!
All it has is:
Wadmerger 1.3 with R
Wadmerger 1.4
Objects list
!!!!!!!!!!!!!!!!!!!
IP: Logged |
Michiel
Member Posts: 216
From:14th floor
Registered: Jan 2001
|
posted 03-22-2001 12:42 PM
I found the problem. There was something wrong when I was uploading. I think it wad the network, because I still have problems with it. I hope it's fixed now (or almost now).IP: Logged |
Cjmovie
Member Posts: 51
From:Orangeburg, SC US
Registered: Dec 2000
|
posted 03-22-2001 04:19 PM
Michiel,
It said it was tr2wad 1.2,
but when I opened it it said 1.1!!!!
PLUS
Wadmerger said it was version 1.3!!!!!!!!IP: Logged |
psiko
Member Posts: 454
From:Rome
Registered: Mar 2001
|
posted 03-26-2001 03:47 PM
another problem with the import/export of files in/from CAD programs: what will be the dimensions of an object? I mean... If I create for example a brigde, which dimensions do I have to gice to it in order that lara will pass it trought? Michiel, think about it! but very SOON! I am WAITINGGGGG------------------
| |--->> psiko <<---| | IP: Logged |
Michiel
Member Posts: 216
From:14th floor
Registered: Jan 2001
|
posted 03-27-2001 11:10 AM
TR4 support 3 types of bridges from all 1 by 1 sector (a sector is 1024 pixels long in TR). A flat bridge, a bridge with a small slope (1 click) and a bridge with a large slope (2 clicks). There's also a 2x2 flat platform that can move up (down?), like the sand. You can change it in a elevator, but I don't know if you can let it go down.Michiel IP: Logged |
runningonair
Member Posts: 129
From:London, UK
Registered: Jan 2001
|
posted 03-28-2001 06:13 AM
Hi,I've got this run time error problem too with TR2WAD 1.2 runtime error '48'
data not found:zlib I have the full version of WadMerger 1.6 that works fine and I've even downloaded and installed the VB5 run times. When I do a search for "zlib" there is nothing there. Any idea how to get this to work? IP: Logged |
psiko
Member Posts: 454
From:Rome
Registered: Mar 2001
|
posted 03-28-2001 04:37 PM
try to find it in your computer.... probably u have it already if u use programs like ICQ... just copy and paste!------------------
| |--->> psiko <<---| | IP: Logged |
runningonair
Member Posts: 129
From:London, UK
Registered: Jan 2001
|
posted 03-29-2001 10:35 AM
thanks.That worked. IP: Logged |
Joseph Seymour
Member Posts: 85
From:Oakland, Md, USA
Registered: Sep 1999
|
posted 03-29-2001 05:53 PM
I think if you guys like to move object, Try this program out 'TRWEST'..The Address is...
http://www.jps.net/mikejj/trwest/ See ya... IP: Logged |
Jan
Member Posts: 89
From:Osthofen
Registered: Dec 2000
|
posted 03-30-2001 10:13 AM
There is just one problem. After you edited a wad-file with WadMerger you canīt open this Wad in TRWEST !!!Bye Jan IP: Logged |
85
Member Posts: 192
From:Maryland USA
Registered: Apr 2000
|
posted 03-30-2001 10:25 PM
Very impressive, Michiel!  Only problem is that it seems that WAD Merger doesn't update the .WAS file or sumthing when you attempt to import anything, therefore making it impossible to compile or open in TRWEST. I hope you can figure this out soon!! I can't wait to play around with it.P.S. How did you get the headset out of VCI? I can't seem to find it... ------------------
Rock on. 85 IP: Logged |
Michiel
Member Posts: 216
From:14th floor
Registered: Jan 2001
|
posted 04-01-2001 12:11 AM
I copied the headset with TR2WAD. It's in the VCI levels as BINOCULAR_ITEM and BINOCULAR_GRAPHICS. The next version (maybe final too) will support all TR games.
I already uploaded the new runtime files (including ZLib). Because a program was needed, I included the current version of WADMerger 1.7 (you can only clear meshes, the rest won't work yet.)Michiel IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
