Posts: 405
From:Suffolk, England
Registered: Apr 2001

posted 06-22-2001 09:53 AM               

---

I'm sure that I'm just having a blond moment, but I'm trying to open a door with one of the switches with the Karnak wad. This is what I've done, Clicked on the door, then clicked on the square where Lara will stand to activate the switch. Then set the trigger type to "switch". She works the switch fine, but the door doesn't open. Any ideas as to what I'm doing wrong?
Em xx

IP: Logged

Posts: 809
From:hornchurch, essex. england.
Registered: Dec 1999

posted 06-22-2001 10:05 AM               

---

Em.... click on the door and set a normal trigger. place the switch on the same square and click on the switch itself (it should be red with face edit mode OFF). now click on the square the switch is on and hit the purple trigger button, then click on the dialog box for the trigger...in the box that opens click on trigger and select switch from the list. click ok and ok again to close the box.... your switch will now open the door (note: some switches need a number entered in OCB for the correct animatiions to work)

------------------
I WAS PRESSING THE DARN WALK BUTTON !!

[This message has been edited by inchdix (edited 06-22-2001).]

IP: Logged

Posts: 405
From:Suffolk, England
Registered: Apr 2001

posted 06-22-2001 10:29 AM               

---

Ofcourse! I should have remembered, I was setting the switch trigger for the door instead of the switch! Doh!!
Cheers sweetheart!
Em xxx

IP: Logged