|
Author
|
Topic: How do you make the fixed camra snap back to Lara after a few seconds?
|
Brad Casali
Member Posts: 465
From:Sandusky, Ohio, USA
Registered: Jun 2001
|
posted 08-07-2001 10:04 AM
   
I have a trigger for the fixed camra to show a door opening. But the camra stays glued to that door and doesn't snap back to Lara. How to I make it hold for about 2 seconds and then snap back to Lara afterwards without it holding on that door forever?Thanks! ------------------
http://www.geocities.com/hicho15/Lpage.html IP: Logged |
wiredGIRL
Member Posts: 252
From:
Registered: May 2001
|
posted 08-07-2001 10:19 AM
I suppose you use the timer option? I've never done anything like this before but that sounds right...------------------
You're the Diet Coke of evil! Just one calorie, not evil enough! IP: Logged |
Brad Casali
Member Posts: 465
From:Sandusky, Ohio, USA
Registered: Jun 2001
|
posted 08-07-2001 10:49 AM
I tried that but it didn't work.
Come on people, does anyone know?------------------
http://www.geocities.com/hicho15/Lpage.html IP: Logged |
bob5
Member Posts: 315
From:SC
Registered: May 2001
|
posted 08-07-2001 10:53 AM
Set the trigger for the camera to "One Shot"Then enter "2" in the timmer. That should work. IP: Logged |
Kiopo
Member Posts: 739
From:Liverpool, UK
Registered: Jul 2001
|
posted 08-07-2001 10:53 AM
I do.------------------
 Visit my site: http://www.tombraiderconnection.8k.com
UNDER CONSTRUCTION Or Email me james.mcc@btinternet.com IP: Logged |
Kiopo
Member Posts: 739
From:Liverpool, UK
Registered: Jul 2001
|
posted 08-07-2001 10:55 AM
You enter the time (in seconds) in the set trigger type pop up box.------------------
Visit my site: http://www.tombraiderconnection.8k.com
UNDER CONSTRUCTION Or Email me james.mcc@btinternet.com IP: Logged |
bob5
Member Posts: 315
From:SC
Registered: May 2001
|
posted 08-07-2001 10:57 AM
Oops didn't read the question.You need to use a camera target. I'll tell you how to do it just give me five min. I have done this before. IP: Logged |
Kiopo
Member Posts: 739
From:Liverpool, UK
Registered: Jul 2001
|
posted 08-07-2001 10:57 AM
Oh no, thats for the basic camera, sorry...IP: Logged |
Kiopo
Member Posts: 739
From:Liverpool, UK
Registered: Jul 2001
|
posted 08-07-2001 10:59 AM
Use a basic camera instead, then use a camera target to point it at it, then enter the time in seconds in the set trigger type pop up box.------------------
Visit my site: http://www.tombraiderconnection.8k.com
UNDER CONSTRUCTION Or Email me james.mcc@btinternet.com IP: Logged |
bob5
Member Posts: 315
From:SC
Registered: May 2001
|
posted 08-07-2001 11:10 AM
First place the switch opens the door. Click on the switch then click on the square below the switch and trigger it...set the trigger type to a switch.
Then place your fixed camera where it to be be looking at the door from. Then place a camera target from the objects menu where you want the camera to be looking at.
Use the floor + and - buttons to raise and lower them.
Then trigger the fixed camera to the square with the switch. Click on the text box next to the pink trigger button and enter "2" into the timer for the trigger of the camera. Then trigger the camera target on the same square as the switch twice. On one of the triggers for the camera target..click on the text box next to the pink trigger button. Then then in the set trigger type window click the text box next to "Trigger". Select "target" from the list. Leave the other trigger for the camera target like it is. Then trigger the door on the same square as the switch. Thats how I do it. How you use the switch the camera will look at the door opening...then snap back to Lara. IP: Logged |
Brad Casali
Member Posts: 465
From:Sandusky, Ohio, USA
Registered: Jun 2001
|
posted 08-07-2001 11:34 AM
Thanks a lot!
It worked!------------------
http://www.geocities.com/hicho15/Lpage.html IP: Logged |
jeffrey van oort
Member Posts: 265
From:Eindhoven,nb,Netherlands
Registered: Jun 2001
|
posted 08-08-2001 01:27 AM
There's a other way to do it.
use your flyby cam.
put it in the direction you wish.
and press o not 0 but o, now you see the obc screen.
press the button 0,8 and 6.
if it is ok.
it should work. ------------------
Ain't never learned!!! IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
