Posts: 17
From:
Registered: Jul 2001

posted 08-18-2001 02:09 PM               

---

why does everytime i place an object in the level editor window, in the game there is no object just laras ***

why does this happen and how can i fix it?

IP: Logged

Posts: 17
From:
Registered: Jul 2001

posted 08-18-2001 02:28 PM               

---

laras 'arse' that is

IP: Logged

Posts: 184
From:Left Luggage Locker #8, Heathrow Airport, London
Registered: May 2001

posted 08-18-2001 02:37 PM               

---

Hi, welcome to the forum,

Type:

lara's butt

..into the search (top right of this page).

Good luck!

IP: Logged

Posts: 405
From:Suffolk, England
Registered: Apr 2001

posted 08-19-2001 04:46 AM               

---

It seems to me that what you are doing is not saving this file under the right wad. For example this would happen if you built a level using the Karnak wad, and then when you ouptut it, you use Settomb. Make sure that if this is a new wad that you have downloaded, such as the Angkor wat, then you create a new block of script for it with the name of the wad you are using at the bottom of that block. Let me know if I haven't explained this very well.
Emma

------------------

http://www.angelfire.com/d20/emmastrle

IP: Logged

Posts: 17
From:
Registered: Jul 2001

posted 08-19-2001 10:28 AM               

---

it happens on the dinosuar wad that lil kid made and all other downloaded wads

how do i put them in the script file?

IP: Logged

Posts: 405
From:Suffolk, England
Registered: Apr 2001

posted 08-19-2001 10:38 AM               

---

Go into your script file and copy a level section from one of your existing levels. Then paste it where you would like this level to be. Now change the name of the wad, this should be at the bottom of the info that you just pasted, to match the name of the wad that you are using. You can also change the name of the level to read what you want. Now save this, and open up the english file. Now look at the list of levels there and chose one of the names that you are'nt currently using, you need to type the name of your new level over this. Make sure it reads exactly the same as it does in the script file or it won't work. Now save this and go into dos to do the relevant commands. If you don't know what these are then you can find it in the manual. Hope I have helped, and let me know if you get stuck.

------------------

click the above picture to go to my site

IP: Logged

Posts: 17
From:
Registered: Jul 2001

posted 08-20-2001 06:48 AM               

---

thanx emma p

IP: Logged