|
Author
|
Topic: Help with spike trap error please
|
Conan the Barbarian
Member Posts: 98
From:Basingstoke, Hampshire, England
Registered: Aug 2001
|
posted 08-31-2001 08:08 AM
   
I've created a hall with spike traps using the angkor wad and textures.I've set a trigger for each spike (all placed on the same square so that they all activate when lara steps on the tile). I've set the OCB for each to 20 so that they come up and stay up (per the manual). I've placed a finish trigger in the level. This is the only room in the level. The spikes trigger and will injure lara when she is near them. However.... the level will not go back to the ' choose a level to load ' screen. I have to reboot! HEEEEELP! Ta Conan IP: Logged |
Driber_IF
Member Posts: 823
From:Den Haag, The Netherlands
Registered: Apr 2001
|
posted 08-31-2001 09:52 AM
this is probebly not a spikes problem, but a finish trigger problem
enter 24 in the the timer field of the finish triggeralso, when you can't get out of the level, try pressing P and select "exit to title" or just press ALT+F4 good luck
------------------
 
Tomb Raider - Ancient Legends levels (2), walkthroughs,
tutorials, wallpapers and other TR goodies on driber.cjb.net
!!! new: the full release of the OBJECTS ARCHIVE is out !!! IP: Logged |
Phabius Phodes
Member Posts: 195
From:Sao Paulo, SP, Brazil
Registered: Jun 2001
|
posted 08-31-2001 09:58 AM
Or...You donīt have your Camera Coordinates setings adjusted right.
The load screen is trying to show a room which does not exist, so it shows a black screen and you have to start the exe again. Itīs on the manual. See Camera Coordinates and make the changes to your script. IP: Logged |
Conan the Barbarian
Member Posts: 98
From:Basingstoke, Hampshire, England
Registered: Aug 2001
|
posted 08-31-2001 10:41 AM
Thanks to :Driber_IF Phabius Phodes Will try your suggestions and let you know the results Ta Conan IP: Logged |
Conan the Barbarian
Member Posts: 98
From:Basingstoke, Hampshire, England
Registered: Aug 2001
|
posted 08-31-2001 11:29 AM
problem resolved - appears angkor wad corrupted or something????Used the tut wad and everything OK - no caeras defined yet so not that, but did the end trigger bit just to be on the safe side. Ta Conan IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
