|
Author
|
Topic: Toggle Opacity Problem
|
bob5
Member Posts: 453
From:SC
Registered: May 2001
|
posted 09-02-2001 10:06 AM
   
I know that I used toggle opacity for something but she can still walk through it.What could I have done wrong. IP: Logged |
Phabius Phodes
Member Posts: 256
From:Sao Paulo, SP, Brazil
Registered: Jun 2001
|
posted 09-02-2001 10:22 AM
Toggle opacity is used for windows, grates, etc.1 Make a door between two rooms. 2 Choose the apropriate texture (grate, window, etc, which should have its transparent portions "pink" in the TGA file). 3 Click on the door in the 2D grid. It will have a green outline. 4 Click the Toggle Opacity button. The door will become red in the 3D window. 5 Apply the texture in the door. 6 Repeat the procedure in the other side of the door, using the same texture. Thatīs it. IP: Logged |
piega
Member Posts: 205
From:Netherlands
Registered: Dec 2000
|
posted 09-02-2001 12:06 PM
Hi, when you use toggle opacity be sure that there is a wall above it. If you made a fence between rooms with no walls above it toggle opacity wont work. If you want to make a fense make walls above it and texture them transparent...IP: Logged |
psiko
Member Posts: 506
From:Rome
Registered: Mar 2001
|
posted 09-03-2001 04:51 AM
It didn't work to me once I put more then 9 doors in the same room. But I think 8 could be a limit. But, as I said, it happened once... that tip is good piega, but, if I remember well that time I had a wall above... well, sorry I don't know what happened to that room.------------------
| |--->> psiko <<---| | DOWNLOAD the TECHNOEGYPTIANS PORTAL
http://tombraider.videogame.it/giochi/trle/livelli/tep.zip First level from "Tomb Raider A - The TechnoEgyptians" IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
