|
Author
|
Topic: Shortcuts????
|
bezerker
Junior Member Posts: 5
From:
Registered: Dec 2001
|
posted 12-10-2001 11:12 AM
   
hello.....i have botted up my room editor and ive found that the program is a little to large to fit on my screen.....so i cant reach the sun, shadow ect buttons on the bottom...is there a patch to let me scroll down or a shortcut to put these lights ini think its sumthing to do with my resoulution...im on 960 x 720 ......ive tried to change it but it wont move.....the screen goes dark and come back again..but it stays on the res. any help would be much appreciated. Thanx ps. thanx to everyone who helped me with my broken disc..i eventually found a friend and i just installed it on my comp IP: Logged |
skibsy
Member Posts: 251
From:London
Registered: Apr 2001
|
posted 12-10-2001 11:30 AM
The editor needs to be run un 1024x768 resolution.Have you been able to set your desktop to this resolution before or is it only recently you havn't been able to do so? Try setting your desktop to this res,make sure you click on apply then click OK.
If it doesn't work, either your monitor isn't capable of 1024x768 (older ones ain't), or there is a problem with your video card drivers....Make sure you have the most up to date drivers. Also when running the editor in order to view it properley ,hit ALT + ENTER together .This will make buttons that should be visible at the bottom appear if they are not there, providing you are in 1024x768 res. Try the above, see if it helps...if not post back. IP: Logged |
bezerker
Junior Member Posts: 5
From:
Registered: Dec 2001
|
posted 12-10-2001 02:24 PM
thanx man but i tried all that..when i try to change my settings...the screen goes black but does not change...ive also tried alt enter..no luck.....i can just not get the top of the buttons  anything else? IP: Logged |
skibsy
Member Posts: 251
From:London
Registered: Apr 2001
|
posted 12-10-2001 03:13 PM
I can't think of anything else at the moment...sorry Hopefully someone will have some ideas. IP: Logged |
psiko
Member Posts: 756
From:unconsciousness
Registered: Mar 2001
|
posted 12-10-2001 03:19 PM
what kind of monitor do you have? I have two pc's and my old one is a 14" but it can have the 1024x768 resolution too...anyhow try 1024 x768 with 16 bit (65,000 colours) this works to me and with less bits you can have a higher resolution with old videocard. IP: Logged |
bezerker
Junior Member Posts: 5
From:
Registered: Dec 2001
|
posted 12-10-2001 03:30 PM
well if my video card is my 3dfx card then its a voodoo x3 so its quite newmy monitor is sumthing like 14" but thats the problem....i go to settings, properties, change resoulution to 800 x 600 even..i press apply, the screen goes black it comes back on still the same resoulution..thats my main problem IP: Logged |
bob5
Member Posts: 617
From:SC
Registered: May 2001
|
posted 12-10-2001 03:33 PM
Maybe try to have the settings take efect after you restart your computerIP: Logged |
Conan the Barbarian
Member Posts: 450
From:Basingstoke, Hampshire, England
Registered: Aug 2001
|
posted 12-10-2001 09:14 PM
suggest you check you have latest drivers for video cardAlso check refresh rate set for monitor - you could be trying to refresh at a higher or lower rate than the monitor is capable of
------------------
Conan the Barbarian
email: conanthebarbarian@ntlworld.com
a.k.a. Ted Swippet
email:tswippet@hotmail.com
 IP: Logged |
aktrekker
Member Posts: 796
From:WA, USA
Registered: Apr 2001
|
posted 12-11-2001 02:31 AM
A 14" monitor might not be able to display 1024x768. In fact, I don't remember one that could.
If you can afford a voodoo3 card, you might want to also upgrade your monitor. A whopping 15" is under $100 now. 
IP: Logged |
Conan the Barbarian
Member Posts: 450
From:Basingstoke, Hampshire, England
Registered: Aug 2001
|
posted 12-11-2001 02:05 PM
I don't want to appear to be bragging  but 15" is not whopping 14" is archaic 15" is bearable 17" is adequate 19" is Kewel 21" is Mmmm > 21" is Nirvana! Ha ------------------
Conan the Barbarian
email: conanthebarbarian@ntlworld.com
a.k.a. Ted Swippet
email:tswippet@hotmail.com
IP: Logged |
bob5
Member Posts: 617
From:SC
Registered: May 2001
|
posted 12-11-2001 05:27 PM
i have a 19" Do you have a 21 There HUGE IP: Logged |
aktrekker
Member Posts: 796
From:WA, USA
Registered: Apr 2001
|
posted 12-12-2001 11:08 AM
It was a joke. I have a 19" Viewsonic, sharp as a needle at 1600x1200. DVDs look unbelievable. 
IP: Logged |
Dan Croft
Junior Member Posts: 15
From:UK
Registered: Nov 2001
|
posted 12-13-2001 09:51 AM
Hi I have a similer problem i just press maximise in the top right and you should be able to see half of the lighting buttons.IP: Logged |
aktrekker
Member Posts: 796
From:WA, USA
Registered: Apr 2001
|
posted 12-13-2001 11:08 AM
And don't forget to make your task bar (at the bottom of the screen) auto-hide. It gives a little more screen space.
IP: Logged |
Driber_IF
Moderator Posts: 1732
From:Den Haag, The Netherlands
Registered: Apr 2001
|
posted 12-14-2001 05:11 AM
quote:
Originally posted by Dan Croft:
Hi I have a similer problem i just press maximise in the top right and you should be able to see half of the lighting buttons.
hit ALT+ENTER and you'll see the whole thing ------------------
 
 Tomb Raider - Ancient Legends levels (2), walkthroughs,
tutorials, wallpapers and other TR goodies on driber.cjb.net
!!! new: it's fresh and it's fresh...new design - G5 - !!!
visit the TRLE Chatbox for live online help with the LE or just to get to fellow forum members this week's quote:
Give man a couple of pills and he'll be dancing for hours. Give man a turntable and he'll be dancing for generations.IP: Logged |
bezerker
Junior Member Posts: 5
From:
Registered: Dec 2001
|
posted 12-14-2001 05:15 AM
yeah dan croft..that what it was like....i had a 17" then it broke......so i havt put up with 14"and ive done all the maximising and alt enter stuff...that way i can see the top button...but its not enough to click on IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
