Posts: 55
From:Germany
Registered: Apr 2002

posted 04-18-2002 10:18 AM               

---

Hi
I made my own title flyby. It consists of four sequences. The second sequence is triggered by the last camera of the first sequence with a FLYBY trigger, . . . (as you can read it in the manual). In the game it doesn't work correctly: When the last camera of the last sequence triggers the first sequence again the first sequence is played fine again but when the last camera should trigger the second sequence it doesn't work. Then the camera shows where Lara is placed and it stays so.
What's wrong?

IP: Logged

Posts: 146
From:CT, USA
Registered: Jan 2002

posted 04-18-2002 10:24 AM               

---

Are there any Heavy triggers in the flyby level? If so, replace them with normal triggers.

IP: Logged

Posts: 1535
From:Omicron Theta science colony
Registered: May 2001

posted 04-18-2002 12:17 PM               

---

I would delete all but the first two camera sequences and get them to function correctly first.
Check each step very carefully and also check that you have selected 'one shot' if this is applicable.

IP: Logged

Posts: 284
From:Rotterdam
Registered: Dec 2001

posted 04-18-2002 12:30 PM               

---

I got the same problem when I created a lara's home flyby, but it works fine now. Place a TRIGGER for FLYBY x below the last camera and press button 14 in the ocb worked for me.

IP: Logged

Posts: 55
From:Germany
Registered: Apr 2002

posted 04-18-2002 12:52 PM               

---

It works. Some cameras triggered heavy triggers and I replaced them with normal triggers and it worked!

Thank you , now I can go on working!

Leisure

IP: Logged