|
Author
|
Topic: Water rooms
|
snickrep
Member Posts: 212
From:Vero Beach, FL , USA
Registered: Nov 2001
|
posted 06-19-2002 12:55 PM
   
How do I make a water room and connect it to a room above?IP: Logged |
Malte
Member Posts: 295
From:Germany
Registered: Apr 2002
|
posted 06-19-2002 01:19 PM
Water room: Click W in the water room. The value (1-4) specifies the moving of the water.Choose the room above, select the squares for the door and click the black DOOR button. Look in the manual for more details. ------------------
Download my projects: Levels:
Search in Venice! Tools:
BmpToRaw 3 Skies:
Star sky IP: Logged |
snickrep
Member Posts: 212
From:Vero Beach, FL , USA
Registered: Nov 2001
|
posted 06-19-2002 02:14 PM
Everytime I do that, it says cannot connect door.IP: Logged |
snickrep
Member Posts: 212
From:Vero Beach, FL , USA
Registered: Nov 2001
|
posted 06-19-2002 03:22 PM
 IP: Logged |
Matreya
Junior Member Posts: 3
From:
Registered: Apr 2002
|
posted 06-19-2002 08:11 PM
Are you sure that you've selected the correct squares for the door? Try making a door only one square large that you're positive is on the right place - if the rooms still don't connect, then the problem is most likely in heights of the water room ceiling and upper room floor. Either the rooms are not touching where you want the door to be, or there is a spot which is 'sticking out' and causing the rooms to overlap (or both). Matreya IP: Logged |
Tomb_Raider_Nut
Member Posts: 1373
From:Millwaukee,Wi,USA
Registered: Jun 2001
|
posted 06-19-2002 08:22 PM
Are you sure your in the upper room connecting to the lower room?------------------
TRLE SEARCH ENGINE  IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
